Blink the LED Strip

Code

The code in the editor below is ready to run! Plug your Code Lab in to your computer's USB port with the cable and hit 'Upload Your Code!' to see what it does. Change something in the code, like a delay or pin number. Try to add something new to the program - it's yours to tinker with! You can always press the 'Restore' button to return the code to the working example.


/* Blink the entire LED Strip */ #include "LEDStrip.h" //The LEDStrip.h library gives your code access to special functions exclusive to the LED Strip LEDStrip strip = LEDStrip(50, 13, 12); //Set up the strip by defining how many pixels (50) and which pins of the microchip are used (always 13 and 12 on Code Lab) void setup() { } void loop() { strip.setPixel(strip.All, 200); //use strip.All in the place where the pixel number normally goes,then the color (0-300) strip.draw(); //Send the setPixel values to the LED Strip delay(1000); //Wait 1000 milliseconds (1 second) with the strip lit up strip.clear(); //Strip.clear() to sets the entire strip have no color value strip.draw(); //Send the strip.clear() values to the LED Strip delay(1000); //Wait 1000 milliseconds before starting the loop again } // (c) 2021 Let's Start Coding. License: www.letsstartcoding.com/bsdlicense
 

Walkthrough Video

Watch the video for a line-by-line explanation of how the example program works. Then you'll be ready to make some changes of your own!

Video Notes for Code Lab Users:

  • You will use “50” instead of “15” as the first argument in your LEDStrip function.

  • You don’t need to worry about the wire colors for ports 13 and 12. Those connections are already permanently set on Code Lab.

Use this spectrum to estimate the color values you'll need for your 'setPixel' arguments to achieve your favorite color!

Challenges

Can you complete the challenge? Change the code in your code editor above. Upload your code to see the effect when you're finished. Complete a challenge? Check it off the list!

Concepts

These are the new code concepts covered in this example program. To become a great coder, read through these concepts to learn new vocabulary.

Quiz

If you're having trouble, try to run an experimental program or look at the example code to help you find the answer.

1. Which syntax ends the entire 'void loop' function?




2. Which syntax ends a single code command?