Jitter Buzz's Motor

Code

The code in the editor below is ready to run! Plug Buzz in to your computer's USB port with the cable and hit 'Upload Your Code!' to see what it does. Change something in the code, like a delay or pin number. Try to add something new to the program - it's yours to tinker with! You can always press the 'Restore' button to return the code to the working example.


/* Vibrate Buzz's motor on and off once per second */ void setup(){ pinMode(9,OUTPUT); //Set the motor as an output } void loop(){ digitalWrite(9,HIGH); //Turn on pin 9 delay(1000); //Wait 1000 milliseconds (1 second) digitalWrite(9,LOW); //Turn off pin 9 delay(1000); //Wait 1000 milliseconds before restarting the loop code } //(c) 2023 Let's Start Coding. License: www.letsstartcoding.com/bsdlicense
 

Walkthrough Video

Watch the video for a line-by-line explanation of how the example program works. Then you'll be ready to make some changes of your own!

Challenges

Can you complete the challenges? Change the code in your code editor above. Upload your code to see the effect when you're finished. Complete a challenge? Check it off the list!