7_8 Buttons Raise and Lower Motor Strength

Buttons Raise and Lower Motor Strength

Code

The code in the editor below is ready to run! Plug Code Lab Mini in to your computer's USB port with the cable and hit 'Upload Your Code!' to see what it does. Change something in the code, like a delay or pin number. Try to add something new to the program - it's yours to tinker with! You can always press the 'Restore' button to return the code to the working example.


// Press Button 7 to increase the strength of the motor, and button 4 to decrease it int strength = 0; //a variable named 'strength' that is an integer (whole number) and starting value of 0 void setup(){ pinMode(3,OUTPUT); //motor pinMode(4,INPUT_PULLUP); //button 1 (lowers strength) pinMode(7,INPUT_PULLUP); //button 2 (raises strength) } void loop(){ analogWrite(3,strength); //use the strength variable as the analogWrite strength (0-255) if(digitalRead(7)==LOW){ //If button 7 is pressed strength++; //raise the motor strength delay(20); //a delay to slow down the fade of the strength } if(digitalRead(4)==LOW){ //If button 4 is pressed strength--; //lower the motor strength delay(20); //adjust the delays for a slower, smoother fade of the motor // -- is shorthand for 'subtract one from the variable' } if(strength < 0 || strength > 255){ //if the variable goes below 0 OR above 255 strength = 0; //set it to 0. } } // (c) 2023 Let's Start Coding. License: www.letsstartcoding.com/bsdlicense
 

Walkthrough Video

Watch the video for a line-by-line explanation of how the example program works. Then you'll be ready to make some changes of your own!

Challenges

Can you complete the challenge? Change the code in your code editor above. Upload your code to see the effect when you're finished. Complete a challenge? Check it off the list!