8_1 Light Sensor Sets LED Brightness

Light Sensor Sets LED Brightness

Code

The code in the editor below is ready to run! Plug Code Lab Mini in to your computer's USB port, make sure that your Code Lab Mini Sensor Trio Add-On (sold separately) is attached, and hit 'Upload Your Code!' to see what it does. Change something in the code, like a delay or pin number. Try to add something new to the program - it's yours to tinker with! You can always press the 'Restore' button to return the code to the working example.

If you haven't set up your Code Lab Mini Sensor Trio Add-On yet, visit Chapter 0 to watch a video showing you how to do that.

Restore 12 14 18 24 30

Monitor Upload Your Code!

/* Use the light sensor to set the brightness of an LED. A shadow over the sensor dims the light, and a flashlight on the sensor makes the LED brighter. */ void setup() { pinMode(A2,INPUT); //light sensor pinMode(10,OUTPUT); //LED } void loop() { //Create a variable with a value of the reading from the light sensor (0-1023) divided by 4 int brightness = analogRead(A2)/4; analogWrite(10,brightness); //Use the variable to set the brightness of the LED. analogWrite can send a max value of 255. } // (c) 2023 Let's Start Coding. License: www.letsstartcoding.com/bsdlicense

 

It looks like your computer isn't set up to code yet. Setup My Computer

Success!

Compile errors:

Serial port monitor: Input: Send Close

 

Walkthrough Video

Watch the video for a line-by-line explanation of how the example program works. Then you'll be ready to make some changes of your own!

Challenges

Coming Soon!